7. Standard Product Generation

• 7.1 Introduction
• 7.2 From ERD to SPD
  • 7.2.1 Reading the ERD
  • 7.2.2 Determination of the data range
  • 7.2.3 Subtraction of the `midbit' values
  • 7.2.4 Selection of valid samples
  • 7.2.5 Correction of the integration ramp for the RC time constant
  • 7.2.6 Correction for the reset pulse effects
  • 7.2.7 Removal of electrical cross-talk
  • 7.2.8 Glitch detection
  • 7.2.9 Extraction of the photo-currents and their uncertainties
  • 7.2.10 Conversion to voltages
  • 7.2.11 Assigning wavelengths
  • 7.2.12 Writing the data
• 7.3 From SPD to AAR
  • 7.3.1 Reading data from the SPD
  • 7.3.2 Transient correction
  • 7.3.3 Subtraction of dark currents
  • 7.3.4 Responsivity calibration
  • 7.3.5 Flux calibration
  • 7.3.6 Velocity correction
  • 7.3.7 Output table files
• 7.4 Error Propagation in the SWS Pipeline
  • 7.4.1 Basic formalism
  • 7.4.2 Slope error
  • 7.4.3 Offset error
  • 7.4.4 Gain error
• 7.5 SWS Pipeline Software
  • 7.5.1 Implementation of the errors
  • 7.5.2 Decoding of error tags in the AAR